京順科技首頁公司簡介系列產品解決方案技術支援聯絡我們

首頁 > 系列產品 > 控制器 > XCx 1100

控制器
XCx 1100
----------------------------------

---------------------------------------------------------------------------------

The XCx 1100 is not a PLC or an IPC in the classic sense but corresponds to the advanced concept of a Program-mable Automation Controller (PAC).

It is capable of providing a number of complex automation tasks and scenarios of use for the highest level of perfor-mance and an open, modular architecture. Conventional requirements such as control, regulation, operation, diagnosis and reporting are operated by the XCx 1100 on a standard scalable platform.

The XCx 1100 operates with VxWin, the established combination of the VwWorks real-time operating system and Windows XP embedded. VxWorks takes on the real-time component, i.e. control via PLC, CNC and Motion Control functions, while Windows provides the familiar environment for non-time-critical functions like visualisation and operator dialogs:

• NC operator dialogs

• Visualization

• NC program memory

• Diagnosis

• Configuration

• PLC programming

• Manual

• Operational data logging

The operating systems operate separately from one another, because the XCx 1100 memory management unit (MMU) keeps the program memory areas separate. This ensures that instability on the Windows level has no effect on Schleicher firmware (CNC runtime or PLC runtime) running on VxWorks.



---------------------------------------------------------------------------------

 

Model

Product

R4.507.0200.0

XCA 1100
IPC CNC Controller for 64 interpolated axes

  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • For more than 4 axes
  • ftware option SCR xx required
  • Windows XP embedded
  • Celeron M, 1,5 GHz, 512 MB, 4 GB Compact Flash
  • Ethernet Switch
  • DVI
  • USB interface


Please note the EG-dual-use-VO.

R4.507.0210.0

XCA 1100 C
IPC CNC Controller for 64 interpolated axes

  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • For more than 4 axes
  • ftware option SCR xx required
  • Windows XP embedded
  • Celeron M, 1,5 GHz, 512 MB, 4 GB Compact Flash
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus


Please note the EG-dual-use-VO.

R4.507.0220.0

XCA 1100 CE
IPC CNC Controller for 4 interpolated axes

  • Export version limited to 4 interpolated axes
  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • Windows XP embedded
  • Celeron M, 1,5 GHz, 512 MB, 4 GB Compact Flash
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus

R4.507.0230.0

XCA 1100 CS
IPC CNC Controller for 64 interpolated axes

  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • For more than 4 axes
  • ftware option SCR xx required
  • Windows XP embedded
  • Celeron M, 1,5 GHz, 512 MB, 4 GB Compact Flash
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus
  • SERCOS III


Please note the EG-dual-use-VO.

R4.507.0240.0

XCA 1100 ES
IPC CNC Controller for 4 interpolated axes

  • Export version limited to 4 interpolated axes
  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • Windows XP embedded
  • Celeron M, 1,5 GHz, 512 MB, 4 GB Compact Flash
  • Ethernet Switch
  • DVI
  • USB interface
  • SERCOS III

R4.507.0250.0

XCA 1100 CES
IPC CNC Controller for 4 interpolated axes

  • Export version limited to 4 interpolated axes
  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • Windows XP embedded
  • Celeron M, 1,5 GHz, 512 MB, 4 GB Compact Flash
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus
  • SERCOS III

R4.507.0260.0

XCA 1110 C
PC-based high performance control unit

  • Windows
  • PLC / CNC
  • Ethernet Switch
  • DVI
  • USB
  • SD RAM: 1 GB
  • Solid State Drive: 32 GB
  • CANopen

R4.507.0260.0

XCA 1110 C
IPC CNC Controller for 64 interpolated axes

  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • For more than 4 axes
  • ftware option SCR xx required
  • Windows XP embedded
  • Celeron M, 1,5 GHz, 1 GB DDR2-SODIMM, 32 GB SSD
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus


Please note the EG-dual-use-VO.

R4.507.0270.0

XCA 1110 CE
IPC CNC Controller for 4 interpolated axes

  • Export version limited to 4 interpolated axes
  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • Windows XP embedded
  • Celeron M, 1,5 GHz, 1 GB DDR2-SODIMM, 32 GB SSD
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus

R4.507.0280.0

XCA 1110 CS
IPC CNC Controller for 64 interpolated axes

  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • For more than 4 axes
  • ftware option SCR xx required
  • Windows XP embedded
  • Celeron M, 1,5 GHz, 1 GB DDR2-SODIMM, 32 GB SSD
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus
  • SERCOS III


Please note the EG-dual-use-VO.

R4.507.0290.0

XCA 1110 ES
IPC CNC Controller for 4 interpolated axes

  • Export version limited to 4 interpolated axes
  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • Windows XP embedded
  • Celeron M, 1,5 GHz, 1 GB DDR2-SODIMM, 32 GB SSD
  • Ethernet Switch
  • DVI
  • USB interface
  • SERCOS III

R4.507.0300.0

XCA 1110 CES
IPC CNC Controller for 4 interpolated axes

  • Export version limited to 4 interpolated axes
  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • Windows XP embedded
  • Celeron M, 1,5 GHz, 1 GB DDR2-SODIMM, 32 GB SSD
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus
  • SERCOS III

R4.507.0310.0

XCA 1120 C
IPC CNC Controller for 64 interpolated axes

  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • For more than 4 axes
  • ftware option SCR xx required
  • Windows XP embedded
  • Core 2 Duo, 1,2 GHz, 1 GB DDR2-SODIMM, 32 GB SSD
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus


Please note the EG-dual-use-VO.

R4.507.0320.0

XCA 1120 CE
IPC CNC Controller for 4 interpolated axes

  • Export version limited to 4 interpolated axes
  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • Windows XP embedded
  • Core 2 Duo, 1,2 GHz, 1 GB DDR2-SODIMM, 32 GB SSD
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus

R4.507.0330.0

XCA 1120 CS
IPC CNC Controller for 64 interpolated axes

  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • For more than 4 axes
  • ftware option SCR xx required
  • Windows XP embedded
  • Core 2 Duo, 1,2 GHz, 1 GB DDR2-SODIMM, 32 GB SSD
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus
  • SERCOS III


Please note the EG-dual-use-VO.

R4.507.0340.0

XCA 1120 ES
IPC CNC Controller for 4 interpolated axes

  • Export version limited to 4 interpolated axes
  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • Windows XP embedded
  • Core 2 Duo, 1,2 GHz, 1 GB DDR2-SODIMM, 32 GB SSD
  • Ethernet Switch
  • DVI
  • USB interface
  • SERCOS III

R4.507.0350.0

XCA 1120 CES
IPC CNC Controller for 4 interpolated axes

  • Export version limited to 4 interpolated axes
  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • Windows XP embedded
  • Core 2 Duo, 1,2 GHz, 1 GB DDR2-SODIMM, 32 GB SSD
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus
  • SERCOS III

R4.507.0360.0

XCA 1125 CS
IPC CNC Controller for 64 interpolated axes

  • PC-based high performance control unit
  • CNC operating system with synchronous PLC
  • For more than 4 axes
  • ftware option SCR xx required
  • Windows XP embedded
  • Core 2 Duo, 1,8 GHz, 1 GB DDR2-SODIMM, 32 GB SSD
  • Ethernet Switch
  • DVI
  • USB interface
  • CANopen field bus
  • SERCOS III


Please note the EG-dual-use-VO.

 

控制器